Display Netatmo Weather Station metrics on your LaMetric Time! It shows your indoor and outdoor temperature, carbon dioxide level, humidity, pressure and noise level, and allows you to choose the comfortable limits for each metric.

Once it becomes too hot or too dry in the room, or the carbon dioxide level rises, LaMeric Time warns you so you can immediately fix it.

Moreover, with a location icon you can react to the change more quickly, as you know at a glance which room it comes from.

Display for Netatmo Weather Station

App allows you to display information from IFTTT as well as trigger actions by pressing on "action" button.

Quick Guide
1. Install IFTTT Indicator application to your LaMetric Time.
2. Go to https://ifttt.com/lametric and connect LaMetric channel.
3. Create applet that uses "Update Indicator" action.

IFTTT Indicator

What's the name of that song? Enjoy music on your Sonos speaker and get what's playing on your smart clock at glance. Change track or play/pause your Sonos with the click of a button.

(Unofficial app)

Display & Controller for Sonos

App allows you to control your Philips Hue lights individually or in groups right from your LaMetric Time device with no delay.

Quick hint: 
Short press on the action button to switch between the scenes, brightnesses, colors, or temperature.
Long press on the action button to switch the lights on or off.

(Unofficial app)

Controller for Philips Hue

App allows you to trigger IFTTT Events by pressing on "action" button.

Quick Guide
1. Install IFTTT Button application to your LaMetric.
2. Go to www.ifttt.com, create account and link LaMetric channel to your LaMetric account.
3. Create recipe and choose IFTTT Button application as a trigger.

IFTTT Button

Turn on/off and switch effect on your Nanoleaf Light Panels right from you desk. Light up Nanoleaf Light Panels when you get Instagram Follower, YouTube Subscriber, Facebook Like or any other notification on your smart clock.

Quick hint:
Short press on action button turns lights on and switches effect
Long press on action button switches lights off

(Unofficial App)

Light Controller for Nanoleaf

Home Connect is featured on a wide range of connected home appliances from Bosch, Siemens, Neff, Gaggenau and Thermador. With Home Connect you can connect your home appliances to other devices and services making your home appliance truly smart. Monitor and control your home appliances with Home Connect whether you are at home or out and about.

Use this app to get notifications from the following Home Connect enabled appliance types: oven, washer, coffee machine, dishwasher, dryer, fridge, hood, cooktop, Roxxter.

The following notifications are supported (depending on appliance type): Program finished, Time left to program finish (once a minute), Out of beans, Out of water, Door left open, Alarm clock elapsed, Pre-heat finished, Roxxter stuck, Roxxter unable to find docking station.

Home Connect

Turn your WeMo switches on or off just with a click! LaMetric Time now works with WeMo Switch and WeMo Insight Smart Plug.

Control your smart home appliances with a click: 
- switch off the iron in you laundry room
- kill the lights before sleeping
- ventilate a room without getting up
- control the heater from a sofa
- маке coffee without leaving your bed
- turn the TV off before living a room

A smartphone is only needed for the setup, and then you can enjoy effortless control over all your home appliances plugged into your WeMo switches. For every appliance, you can select identification icon to easily differentiate them all.

Controller for WeMo Switch

App allows you to control your LIFX lights individually or in groups right from your LaMetric Time device with no delay.

Quick hint: 
Short press on the action button to switch between the scenes, brightnesses, colors, or temperature.
Long press on the action button to switch the lights on or off.

(Unofficial app)

Controller for LIFX

Display values from your eedomus devices on your LaMetric Time. Trigger an action on eedomus when the LaMetric Time button is pressed.

eedomus

SolarEdge

Control your IKEA trådfri lights individually or in groups right from your LaMetric Time device.

Quick hint: 
Short press on the action button to switch between the scenes, brightnesses, colors, or temperatures.
Long press on the action button to switch the lights on or off.

Controller for IKEA trådfri

Control your Yeelight individually or in groups right from your LaMetric Time device.

Quick hint: 
Short press on the action button to switch between flows, brightness, temperatures or colors.
Long press on the action button to switch the lights on or off.

P. S. Make sure that a “LAN Control” in your Yeelight app is enabled before proceeding with a light setup.

Controller for Yeelight

This app allows you to play/pause your Kodi media server. In order to use this app, you need to customize the app by specifying the IP address of your Kodi.

Kodi Remote

Royalacademy Spotify

An app that displays artist information for Vince

Spotify For Vince

Display messages from all your ARTIK Cloud devices and services on your LaMetric Time!

ARTIK Cloud

gravio_display1

Combine LaMetric button push with SimpleCommands Routines. Add the LaMetric connection in the SimpleCommands mobile app, add this LaMetric trigger app, link your SimpleCommands account in this LaMetric trigger app, assign a SimpleCommands Routine in the SimpleCommands mobile to this app.

SimpleCommands Trigger

Yadoms

Push AWAIR values to the display with your own script. Example python script: https://github.com/deanlyoung/lametric-apps

AWAIR

Nikola Tesla Plasma Electricity Display https://youtube.com/inthefridge https://soundcloud.com/codyslot